git.scottworley.com Git - tattlekey/blob - client/config.h

   1 /* tattlekey: A one-key UDP keyboard
   2  * Copyright (C) 2023  Scott Worley <scottworley@scottworley.com>
   3  *
   4  * This program is free software: you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License as published by
   6  * the Free Software Foundation, either version 3 of the License, or
   7  * (at your option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  * GNU General Public License for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  16  */
  17
  18 #ifndef CONFIG_H
  19 #define CONFIG_H
  20
  21 #include "lwip/arch.h"
  22
  23 /* Wi-Fi credentials */
  24 extern const char config_wifi_ssid[];
  25 extern const char config_wifi_pass[];
  26
  27 /* Network address of the server to contact */
  28 extern const char config_tattle_server_ip_address[];
  29 extern const u16_t config_tattle_port;
  30
  31 /* For distinguishing reports from multiple tattlekey devices. */
  32 extern const u16_t config_this_tattler_identity;
  33
  34 /* Which GPIO pin is the button connected to?
  35  * The button should span this pin and ground, connecting this pin to ground
  36  * when pressed.
  37  * https://projects.raspberrypi.org/en/projects/introduction-to-the-pico/10
  38  * recommends pins 18, 22, or 28. */
  39 extern const uint config_button_pin;
  40
  41 /* Don't bother reporting each separate button press when it is pressed many
  42  * times in short succession.  (We also use this to de-bounce. :) */
  43 extern const u32_t config_minimum_seconds_between_button_presses;
  44
  45 /* Send each report multiple times. Re-sends are sent with exponential delay:
  46  *   #1 sent immediately
  47  *   #2 after 1 seconds
  48  *   #3 after 2 seconds
  49  *   #4 after 4 seconds
  50  *   #5 after 8 seconds
  51  *   ...
  52  *   #11 after 8 minutes
  53  *   #12 after 17 minutes
  54  *   #13 after 34 minutes
  55  *   #14 after 68 minutes
  56  *   #15 after 2 hours
  57  *   #16 after 4 hours
  58  *   #17 after 9 hours
  59  *   etc.
  60  * This provides some robustness against network outages, automatically
  61  * replaying the log periodically to be collected after connectivity
  62  * is restored. */
  63 extern const uint config_resend_count;
  64
  65 /* These control the size of the per-send-count press queues.
  66 When the button is pressed more than config_maximum_queue_size times
  67 within the resend interval, some presses will be reported fewer
  68 than config_resend_count times. This is usually fine because it's
  69 the old, longest-delyed, most-redundant reports that get dropped;
  70 fresh, timely reports of new button presses will not get anywhere near
  71 config_resend_count in a resend interval because the early resend interals
  72 are so short.  */
  73 extern const uint config_maximum_queue_size;
  74
  75 /* This is paranoia about unanticipated delays.  Setting this to zero
  76 would pobably be fine, but imposing a minimum queue size is an easy
  77 safety measure. */
  78 extern const uint config_minimum_queue_size;
  79
  80 #endif