]> git.scottworley.com Git - tattlekey/blame - client/config.c
client: Rename the event enum values
[tattlekey] / client / config.c
CommitLineData
fbc57595
SW
1#include "config.h"
2
1d699cc3 3/* Wi-Fi credentials */
d7789e5b
SW
4char config_wifi_ssid[] = "THEWIFISSID";
5char config_wifi_pass[] = "THEWIFIPASSWORD";
1e0a316e 6
1d699cc3 7/* Network address of the server to contact */
d7789e5b
SW
8char config_tattle_server_ip_address[] = "192.168.10.10";
9u16_t config_tattle_port = 29803; // 'tk'
1e0a316e 10
1d699cc3 11/* For distinguishing reports from multiple tattlekey devices. */
d7789e5b 12u16_t config_this_tattler_identity = 1;
d1521eda
SW
13
14/* Which GPIO pin is the button connected to?
15 * The button should span this pin and ground, connecting this pin to ground
16 * when pressed.
17 * https://projects.raspberrypi.org/en/projects/introduction-to-the-pico/10
18 * recommends pins 18, 22, or 28. */
d7789e5b 19uint config_button_pin = 18;
2f7a1e89
SW
20
21/* Don't bother reporting each separate button press when it is pressed many
22 * times in short succession. (We also use this to de-bounce. :) */
d7789e5b 23u32_t config_minimum_seconds_between_button_presses = 1;
ff379463
SW
24
25/* Send each report multiple times. */
d7789e5b 26uint config_resend_count = 5;