[tattlekey] / client / config.c

#include "config.h"

/* Wi-Fi credentials */
char wifi_ssid[] = "THEWIFISSID";
char wifi_pass[] = "THEWIFIPASSWORD";

/* Network address of the server to contact */
char tattle_server_ip_address[] = "192.168.10.10";
u16_t tattle_port = 29803; // 'tk'

/* For distinguishing reports from multiple tattlekey devices. */
u16_t this_tattler_identity = 1;

/* Which GPIO pin is the button connected to?
 * The button should span this pin and ground, connecting this pin to ground
 * when pressed.
 * https://projects.raspberrypi.org/en/projects/introduction-to-the-pico/10
 * recommends pins 18, 22, or 28. */
uint button_pin = 18;
Commit	Line	Data
fbc57595 SW	1	#include "config.h"
fbc57595 SW	2
1d699cc3	3	/* Wi-Fi credentials */
fbc57595 SW	4	char wifi_ssid[] = "THEWIFISSID";
fbc57595 SW	5	char wifi_pass[] = "THEWIFIPASSWORD";
1e0a316e	6
1d699cc3	7	/* Network address of the server to contact */
1e0a316e SW	8	char tattle_server_ip_address[] = "192.168.10.10";
	9	u16_t tattle_port = 29803; // 'tk'
	10
1d699cc3	11	/* For distinguishing reports from multiple tattlekey devices. */
1e0a316e	12	u16_t this_tattler_identity = 1;
d1521eda SW	13
	14	/* Which GPIO pin is the button connected to?
	15	* The button should span this pin and ground, connecting this pin to ground
	16	* when pressed.
	17	* https://projects.raspberrypi.org/en/projects/introduction-to-the-pico/10
	18	* recommends pins 18, 22, or 28. */
	19	uint button_pin = 18;