From: Scott Worley <scottworley@scottworley.com>
Date: Sun, 8 Oct 2023 06:29:49 +0000 (-0700)
Subject: client: Respond to button press
X-Git-Tag: v0.1.0~59
X-Git-Url: http://git.scottworley.com/tattlekey/commitdiff_plain/d1521eda56a4768dbf481aa6cf9e75c5a5a7e7f1

client: Respond to button press
---

diff --git a/client/CMakeLists.txt b/client/CMakeLists.txt
index ae97200..7714c1e 100644
--- a/client/CMakeLists.txt
+++ b/client/CMakeLists.txt
@@ -9,6 +9,7 @@ pico_sdk_init()
 
 add_executable(tattlekey
   blink.c
+  button.c
   config.c
   net.c
   tattlekey.c
diff --git a/client/button.c b/client/button.c
new file mode 100644
index 0000000..4df8d66
--- /dev/null
+++ b/client/button.c
@@ -0,0 +1,30 @@
+#include "button.h"
+#include "config.h"
+
+#include "hardware/gpio.h"
+
+#include "pico/stdlib.h"
+
+static callback_t button_callback = NULL;
+
+static void respond_to_gpio_interrupt(uint gpio, uint32_t event_mask) {
+  if (gpio == button_pin && event_mask & GPIO_IRQ_EDGE_FALL &&
+      button_callback) {
+    button_callback();
+  }
+}
+
+void begin_listening_for_button_press(callback_t callback) {
+  button_callback = callback;
+
+  gpio_set_pulls(button_pin, 1, 0);
+
+  /* Allow some time for the pull-up to take effect.
+   * I'm not sure if this is necessary.
+   * https://datasheets.raspberrypi.com/pico/raspberry-pi-pico-c-sdk.pdf says
+   * the internal GPIO pull-up resistors are 50k. */
+  sleep_ms(100);
+
+  gpio_set_irq_enabled_with_callback(button_pin, GPIO_IRQ_EDGE_FALL, 1,
+                                     respond_to_gpio_interrupt);
+}
diff --git a/client/button.h b/client/button.h
new file mode 100644
index 0000000..9f82e15
--- /dev/null
+++ b/client/button.h
@@ -0,0 +1,8 @@
+#ifndef BUTTON_H
+#define BUTTON_H
+
+typedef void (*callback_t)();
+
+void begin_listening_for_button_press(callback_t callback);
+
+#endif
diff --git a/client/config.c b/client/config.c
index d2be496..a8e5844 100644
--- a/client/config.c
+++ b/client/config.c
@@ -10,3 +10,10 @@ u16_t tattle_port = 29803; // 'tk'
 
 /* For distinguishing reports from multiple tattlekey devices. */
 u16_t this_tattler_identity = 1;
+
+/* Which GPIO pin is the button connected to?
+ * The button should span this pin and ground, connecting this pin to ground
+ * when pressed.
+ * https://projects.raspberrypi.org/en/projects/introduction-to-the-pico/10
+ * recommends pins 18, 22, or 28. */
+uint button_pin = 18;
diff --git a/client/config.h b/client/config.h
index 97e2f8c..95c5651 100644
--- a/client/config.h
+++ b/client/config.h
@@ -14,4 +14,11 @@ extern u16_t tattle_port;
 /* For distinguishing reports from multiple tattlekey devices. */
 extern u16_t this_tattler_identity;
 
+/* Which GPIO pin is the button connected to?
+ * The button should span this pin and ground, connecting this pin to ground
+ * when pressed.
+ * https://projects.raspberrypi.org/en/projects/introduction-to-the-pico/10
+ * recommends pins 18, 22, or 28. */
+extern uint button_pin;
+
 #endif
diff --git a/client/tattlekey.c b/client/tattlekey.c
index ec77107..30f92a4 100644
--- a/client/tattlekey.c
+++ b/client/tattlekey.c
@@ -2,9 +2,34 @@
 #include "pico/stdlib.h"
 
 #include "blink.h"
+#include "button.h"
 #include "config.h"
 #include "net.h"
 
+static u16_t seq = 0;
+
+static void button_pressed() {
+  /* TODO: This is interrupt context.  We need to get out of interrupt context
+   * quickly; we should not be doing significant work here, & definitely
+   * shouldn't be sleeping here.  We signal errors with blinking the LED, which
+   * involves sleeping, so this all has to move. */
+  send_report(seq++, 0);
+  signal(4, 200);
+}
+
+static void wait_forever() {
+  /* pico-examples/gpio/hello_gpio_irq/hello_gpio_irq.c implements wait-forever
+   * as "while (1);", but
+   * https://www.raspberrypi.com/documentation/pico-sdk/high_level.html#gaf469c6d691230e9d1008
+   * says sleeping uses less power, so we sleep.  */
+  while (1) {
+    /* https://www.raspberrypi.com/documentation/pico-sdk/hardware.html#rpip7ce2cdc1662dce59296b
+     * says the maximum sleep is 2^32 - 1 microseconds (~71.58 minutes), so we
+     * sleep in chunks. */
+    sleep_ms(1 << 31); /* 35.79 minutes */
+  }
+}
+
 int main() {
   stdio_init_all();
   if (cyw43_arch_init_with_country(CYW43_COUNTRY_USA))
@@ -16,9 +41,7 @@ int main() {
                                          CYW43_AUTH_WPA2_AES_PSK, 10000))
     signal_error_by_blinking();
   signal(3, 200);
+  begin_listening_for_button_press(button_pressed);
 
-  for (int i = 0;; i++) {
-    send_report(i, 0);
-    signal(4, 200);
-  }
+  wait_forever();
 }