X-Git-Url: http://git.scottworley.com/tattlekey/blobdiff_plain/fbc57595f1dfa046d8a8f8a25c3ea7f810579bb9..e8a53974ae88e0bbe0d616be7d53aa060b4ed80d:/client/config.h

diff --git a/client/config.h b/client/config.h
index 5c8af1e..ee3dba8 100644
--- a/client/config.h
+++ b/client/config.h
@@ -1,7 +1,46 @@
 #ifndef CONFIG_H
 #define CONFIG_H
 
-extern char wifi_ssid[];
-extern char wifi_pass[];
+#include "lwip/arch.h"
+
+/* Wi-Fi credentials */
+extern const char config_wifi_ssid[];
+extern const char config_wifi_pass[];
+
+/* Network address of the server to contact */
+extern const char config_tattle_server_ip_address[];
+extern const u16_t config_tattle_port;
+
+/* For distinguishing reports from multiple tattlekey devices. */
+extern const u16_t config_this_tattler_identity;
+
+/* Which GPIO pin is the button connected to?
+ * The button should span this pin and ground, connecting this pin to ground
+ * when pressed.
+ * https://projects.raspberrypi.org/en/projects/introduction-to-the-pico/10
+ * recommends pins 18, 22, or 28. */
+extern const uint config_button_pin;
+
+/* Don't bother reporting each separate button press when it is pressed many
+ * times in short succession.  (We also use this to de-bounce. :) */
+extern const u32_t config_minimum_seconds_between_button_presses;
+
+/* Send each report multiple times. */
+extern const uint config_resend_count;
+
+/* These control the size of the per-send-count press queues.
+When the button is pressed more than config_maximum_queue_size times
+within the resend interval, some presses will be reported fewer
+than config_resend_count times. This is usually fine because it's
+the old, longest-delyed, most-redundant reports that get dropped;
+fresh, timely reports of new button presses will not get anywhere near
+config_resend_count in a resend interval because the early resend interals
+are so short.  */
+extern const uint config_maximum_queue_size;
+
+/* This is paranoia about unanticipated delays.  Setting this to zero
+would pobably be fine, but imposing a minimum queue size is an easy
+safety measure. */
+extern const uint config_minimum_queue_size;
 
 #endif