X-Git-Url: http://git.scottworley.com/tattlekey/blobdiff_plain/fbc57595f1dfa046d8a8f8a25c3ea7f810579bb9..c8c900a6b1e1efdb42ddf7cd3d773f7c7cbed646:/client/config.c

diff --git a/client/config.c b/client/config.c
index 538f432..a9dc66e 100644
--- a/client/config.c
+++ b/client/config.c
@@ -1,4 +1,27 @@
 #include "config.h"
 
+/* Wi-Fi credentials */
 char wifi_ssid[] = "THEWIFISSID";
 char wifi_pass[] = "THEWIFIPASSWORD";
+
+/* Network address of the server to contact */
+char tattle_server_ip_address[] = "192.168.10.10";
+u16_t tattle_port = 29803; // 'tk'
+
+/* For distinguishing reports from multiple tattlekey devices. */
+u16_t this_tattler_identity = 1;
+
+/* Which GPIO pin is the button connected to?
+ * The button should span this pin and ground, connecting this pin to ground
+ * when pressed.
+ * https://projects.raspberrypi.org/en/projects/introduction-to-the-pico/10
+ * recommends pins 18, 22, or 28. */
+uint button_pin = 18;
+
+/* Don't bother reporting each separate button press when it is pressed many
+ * times in short succession.  (We also use this to de-bounce. :) */
+u32_t minimum_seconds_between_button_presses = 1;
+
+/* Send each report multiple times. */
+uint resend_count = 5;
+u32_t resend_interval_ms = 1000;