X-Git-Url: http://git.scottworley.com/tattlekey/blobdiff_plain/e2173399236a55d37e243f666f4052605517699c..d1521eda56a4768dbf481aa6cf9e75c5a5a7e7f1:/client/tattlekey.c

diff --git a/client/tattlekey.c b/client/tattlekey.c
index 910f696..30f92a4 100644
--- a/client/tattlekey.c
+++ b/client/tattlekey.c
@@ -1,22 +1,47 @@
-/**
- * Copyright (c) 2022 Raspberry Pi (Trading) Ltd.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
 #include "pico/cyw43_arch.h"
 #include "pico/stdlib.h"
 
+#include "blink.h"
+#include "button.h"
+#include "config.h"
+#include "net.h"
+
+static u16_t seq = 0;
+
+static void button_pressed() {
+  /* TODO: This is interrupt context.  We need to get out of interrupt context
+   * quickly; we should not be doing significant work here, & definitely
+   * shouldn't be sleeping here.  We signal errors with blinking the LED, which
+   * involves sleeping, so this all has to move. */
+  send_report(seq++, 0);
+  signal(4, 200);
+}
+
+static void wait_forever() {
+  /* pico-examples/gpio/hello_gpio_irq/hello_gpio_irq.c implements wait-forever
+   * as "while (1);", but
+   * https://www.raspberrypi.com/documentation/pico-sdk/high_level.html#gaf469c6d691230e9d1008
+   * says sleeping uses less power, so we sleep.  */
+  while (1) {
+    /* https://www.raspberrypi.com/documentation/pico-sdk/hardware.html#rpip7ce2cdc1662dce59296b
+     * says the maximum sleep is 2^32 - 1 microseconds (~71.58 minutes), so we
+     * sleep in chunks. */
+    sleep_ms(1 << 31); /* 35.79 minutes */
+  }
+}
+
 int main() {
   stdio_init_all();
-  if (cyw43_arch_init()) {
-    printf("Wi-Fi init failed");
-    return -1;
-  }
-  while (true) {
-    cyw43_arch_gpio_put(CYW43_WL_GPIO_LED_PIN, 1);
-    sleep_ms(250);
-    cyw43_arch_gpio_put(CYW43_WL_GPIO_LED_PIN, 0);
-    sleep_ms(250);
-  }
+  if (cyw43_arch_init_with_country(CYW43_COUNTRY_USA))
+    signal_error_by_blinking();
+  signal(1, 200);
+  cyw43_arch_enable_sta_mode();
+  signal(2, 200);
+  if (cyw43_arch_wifi_connect_timeout_ms(wifi_ssid, wifi_pass,
+                                         CYW43_AUTH_WPA2_AES_PSK, 10000))
+    signal_error_by_blinking();
+  signal(3, 200);
+  begin_listening_for_button_press(button_pressed);
+
+  wait_forever();
 }