X-Git-Url: http://git.scottworley.com/tattlekey/blobdiff_plain/de14b62cf9b6042f77a7d41caf5eef99a64a4331..17461dece177a2ca6e34a0cc7412b2352a1e8053:/client/config.c

diff --git a/client/config.c b/client/config.c
index a9dc66e..8a31cf5 100644
--- a/client/config.c
+++ b/client/config.c
@@ -1,27 +1,26 @@
 #include "config.h"
 
 /* Wi-Fi credentials */
-char wifi_ssid[] = "THEWIFISSID";
-char wifi_pass[] = "THEWIFIPASSWORD";
+char config_wifi_ssid[] = "THEWIFISSID";
+char config_wifi_pass[] = "THEWIFIPASSWORD";
 
 /* Network address of the server to contact */
-char tattle_server_ip_address[] = "192.168.10.10";
-u16_t tattle_port = 29803; // 'tk'
+char config_tattle_server_ip_address[] = "192.168.10.10";
+u16_t config_tattle_port = 29803; // 'tk'
 
 /* For distinguishing reports from multiple tattlekey devices. */
-u16_t this_tattler_identity = 1;
+u16_t config_this_tattler_identity = 1;
 
 /* Which GPIO pin is the button connected to?
  * The button should span this pin and ground, connecting this pin to ground
  * when pressed.
  * https://projects.raspberrypi.org/en/projects/introduction-to-the-pico/10
  * recommends pins 18, 22, or 28. */
-uint button_pin = 18;
+uint config_button_pin = 18;
 
 /* Don't bother reporting each separate button press when it is pressed many
  * times in short succession.  (We also use this to de-bounce. :) */
-u32_t minimum_seconds_between_button_presses = 1;
+u32_t config_minimum_seconds_between_button_presses = 1;
 
 /* Send each report multiple times. */
-uint resend_count = 5;
-u32_t resend_interval_ms = 1000;
+uint config_resend_count = 5;