X-Git-Url: http://git.scottworley.com/tattlekey/blobdiff_plain/2f7a1e89aa19dac7903e743e60b275a54a0230cf..b512ec26593fde453ce121f30ba8d36b1e3678df:/client/config.c diff --git a/client/config.c b/client/config.c index c5a38b4..8a31cf5 100644 --- a/client/config.c +++ b/client/config.c @@ -1,23 +1,26 @@ #include "config.h" /* Wi-Fi credentials */ -char wifi_ssid[] = "THEWIFISSID"; -char wifi_pass[] = "THEWIFIPASSWORD"; +char config_wifi_ssid[] = "THEWIFISSID"; +char config_wifi_pass[] = "THEWIFIPASSWORD"; /* Network address of the server to contact */ -char tattle_server_ip_address[] = "192.168.10.10"; -u16_t tattle_port = 29803; // 'tk' +char config_tattle_server_ip_address[] = "192.168.10.10"; +u16_t config_tattle_port = 29803; // 'tk' /* For distinguishing reports from multiple tattlekey devices. */ -u16_t this_tattler_identity = 1; +u16_t config_this_tattler_identity = 1; /* Which GPIO pin is the button connected to? * The button should span this pin and ground, connecting this pin to ground * when pressed. * https://projects.raspberrypi.org/en/projects/introduction-to-the-pico/10 * recommends pins 18, 22, or 28. */ -uint button_pin = 18; +uint config_button_pin = 18; /* Don't bother reporting each separate button press when it is pressed many * times in short succession. (We also use this to de-bounce. :) */ -u32_t minimum_microseconds_between_button_presses = 1000000; +u32_t config_minimum_seconds_between_button_presses = 1; + +/* Send each report multiple times. */ +uint config_resend_count = 5;