client: next_scheduled_send()

[tattlekey] / client / config.c

diff --git a/client/config.c b/client/config.c
index a8e58440dff1b24d52829f6f8989d9afc0b332ac..8a31cf5beb04bf0b4a856e611565370cd7babf1d 100644 (file)
--- a/client/config.c
+++ b/client/config.c
@@ -1,19 +1,26 @@
 #include "config.h"
 
 /* Wi-Fi credentials */
 #include "config.h"
 
 /* Wi-Fi credentials */

-char wifi_ssid[] = "THEWIFISSID";
-char wifi_pass[] = "THEWIFIPASSWORD";
+char config_wifi_ssid[] = "THEWIFISSID";
+char config_wifi_pass[] = "THEWIFIPASSWORD";

 
 /* Network address of the server to contact */
 
 /* Network address of the server to contact */

-char tattle_server_ip_address[] = "192.168.10.10";
-u16_t tattle_port = 29803; // 'tk'
+char config_tattle_server_ip_address[] = "192.168.10.10";
+u16_t config_tattle_port = 29803; // 'tk'

 
 /* For distinguishing reports from multiple tattlekey devices. */
 
 /* For distinguishing reports from multiple tattlekey devices. */

-u16_t this_tattler_identity = 1;
+u16_t config_this_tattler_identity = 1;

 
 /* Which GPIO pin is the button connected to?
  * The button should span this pin and ground, connecting this pin to ground
  * when pressed.
  * https://projects.raspberrypi.org/en/projects/introduction-to-the-pico/10
  * recommends pins 18, 22, or 28. */
 
 /* Which GPIO pin is the button connected to?
  * The button should span this pin and ground, connecting this pin to ground
  * when pressed.
  * https://projects.raspberrypi.org/en/projects/introduction-to-the-pico/10
  * recommends pins 18, 22, or 28. */

-uint button_pin = 18;
+uint config_button_pin = 18;
+
+/* Don't bother reporting each separate button press when it is pressed many
+ * times in short succession.  (We also use this to de-bounce. :) */
+u32_t config_minimum_seconds_between_button_presses = 1;
+
+/* Send each report multiple times. */
+uint config_resend_count = 5;