git.scottworley.com Git - tattlekey/blob - client/config.c

   1 #include "config.h"
   2
   3 /* Wi-Fi credentials */
   4 char wifi_ssid[] = "THEWIFISSID";
   5 char wifi_pass[] = "THEWIFIPASSWORD";
   6
   7 /* Network address of the server to contact */
   8 char tattle_server_ip_address[] = "192.168.10.10";
   9 u16_t tattle_port = 29803; // 'tk'
  10
  11 /* For distinguishing reports from multiple tattlekey devices. */
  12 u16_t this_tattler_identity = 1;
  13
  14 /* Which GPIO pin is the button connected to?
  15  * The button should span this pin and ground, connecting this pin to ground
  16  * when pressed.
  17  * https://projects.raspberrypi.org/en/projects/introduction-to-the-pico/10
  18  * recommends pins 18, 22, or 28. */
  19 uint button_pin = 18;
  20
  21 /* Don't bother reporting each separate button press when it is pressed many
  22  * times in short succession.  (We also use this to de-bounce. :) */
  23 u32_t minimum_seconds_between_button_presses = 1;
  24
  25 /* Send each report multiple times. */
  26 uint resend_count = 5;
  27 u32_t resend_interval_ms = 1000;