git.scottworley.com Git - tattlekey/blame_incremental

... / ...

Commit	Line	Data
	1	#include "config.h"
	2
	3	/* Wi-Fi credentials */
	4	char config_wifi_ssid[] = "THEWIFISSID";
	5	char config_wifi_pass[] = "THEWIFIPASSWORD";
	6
	7	/* Network address of the server to contact */
	8	char config_tattle_server_ip_address[] = "192.168.10.10";
	9	u16_t config_tattle_port = 29803; // 'tk'
	10
	11	/* For distinguishing reports from multiple tattlekey devices. */
	12	u16_t config_this_tattler_identity = 1;
	13
	14	/* Which GPIO pin is the button connected to?
	15	* The button should span this pin and ground, connecting this pin to ground
	16	* when pressed.
	17	* https://projects.raspberrypi.org/en/projects/introduction-to-the-pico/10
	18	* recommends pins 18, 22, or 28. */
	19	uint config_button_pin = 18;
	20
	21	/* Don't bother reporting each separate button press when it is pressed many
	22	* times in short succession. (We also use this to de-bounce. :) */
	23	u32_t config_minimum_seconds_between_button_presses = 1;
	24
	25	/* Send each report multiple times. */
	26	uint config_resend_count = 5;